View S-AU68M_467203.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

S-AU68M
TOSHIBA RF POWER AMPLIFIER MODULE
S-AU68M
UHF BAND FM POWER AMPLIFIER MODULE
Unit in mm
MAXIMUM RATINGS (Tc=25C)
CHARACTERISTIC DC Supply Voltage DC Supply Voltage Input Power Output Power Total Current Operating Case Temperature Range Storage Temperature Range SYMBOL VDD VGG Pi Po IT Tc (opr) Tstg RATING 17 6 50 12 3 -30~100 -40~110 UNIT V V mW W A C C
JEDEC EIAJ TOSHIBA Weight: 3.5g
-- -- 5-23E
000707EAA1
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
2001-02-02
1/4
S-AU68M
ELECTRICAL CHARACTERISTICS (Tc=25C)
CHARACTERISTIC Frequency Range Output Power (1) Output Power (2) Total Efficiency Input VSWR Harmonics Load Mismatch SYMBOL frange Po (1) Po (2) T VSWRin HRM -- TEST CONDITION -- VGG = 4V, Pi = 20mW ZG=ZL=50 VDD = 9.6V, Pi = 20mW Po = 7W (VGG = adjust) ZG = ZL = 50 VDD = 15V, Pi = 20mW Po = 7W (VGG = adjust) VSWR LOAD 20: 1 ALL PHASE VDD = 3.5~15.7V, VGG = 0~4V Po<12W, Pi = 20mW VSWR LOAD 3: 1 ALL PHASE VDD=9.6V VDD=6.0V MIN. 450 7 2.7 40 -- -- TYP. -- -- -- -- -- -- MAX. 470 -- -- -- 2.5 -25 UNIT MHz W % -- dB --
No Degradation All spurious output than 60dB below desired signal
Stability
--
--
CAUTION
* This product has intersetting cap. Please pay attention for exceeding stress and foreign matter in your application. And not to take away the cap. * Do not intermingle with normal industrial or domestic waste. * This product is electrostatic sensitivity, please handle with caution.
2001-02-02
2/4
S-AU68M
SCHEMATIC
TEST FIXTURE
2001-02-02
3/4
S-AU68M
CAUTION
These are only typical curves and devices are not necessarily guaranteed at these curves.
2001-02-02
4/4

▲Up To Search▲

Price & Availability of S-AU68M

	To Download S-AU68M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .